The Effect of Inlet Temperature and Pressure on the Efficiency of a Single-stage Impulse Turbine Having a 13.2-inch Pitch-line Diameter Wheel

Efficiency tests have been conducted on a single-stage impulse turbine having a 13.2-inch pitch-line diameter wheel and a cast nozzle diaphram over a range of turbine speeds from 3000 to 17,000 rpm, pressure ratios from 1.5 to 5.0, inlet total temperatures from 1200 deg to 2000 deg R, and inlet total pressures from 18 to 59 inches of mercury absolute. The effect of inlet temperature and pressure on turbine efficiency for constant pressure ration and blade-to-jet speed ration is correlated against a factor derived from the equation for Reynolds number. The degree of correlation indicates that the change in turbine efficiency with inlet temperature and [ressure for constant pressure ration and blade-to-jet speed ration is principally a Reynolds number effect

Meteorological data for four sites at surface-disruption features in Yucca Flat, Nevada Test Site, Nye County, Nevada, 1985--1986

Surface-disruption features, or craters, resulting from underground nuclear testing at the Nevada Test Site may increase the potential for ground-water recharge in an area that would normally produce little, if any, recharge. This report presents selected meteorological data resulting from a study of two surface-disruption features during May 1985 through June 1986. The data were collected at four adjacent sites in Yucca Flat, about 56 kilometers north of Mercury, Nevada. Three sites (one in each of two craters and one at an undisturbed site at the original land surface) were instrumented to collect meteorological data for calculating bare-soil evaporation. These data include (1) long-wave radiation, (2) short-wave radiation, (3) net radiation, (4) air temperature, and (5) soil surface temperature. Meteorological data also were collected at a weather station at an undisturbed site near the study craters. Data collected at this site include (1) air temperature, (2) relative humidity, (3) wind velocity, and (4) wind direction

Generation of ultra-short light pulses by a rapidly ionizing thin foil

A thin and dense plasma layer is created when a sufficiently strong laser pulse impinges on a solid target. The nonlinearity introduced by the time-dependent electron density leads to the generation of harmonics. The pulse duration of the harmonic radiation is related to the risetime of the electron density and thus can be affected by the shape of the incident pulse and its peak field strength. Results are presented from numerical particle-in-cell-simulations of an intense laser pulse interacting with a thin foil target. An analytical model which shows how the harmonics are created is introduced. The proposed scheme might be a promising way towards the generation of attosecond pulses. PACS number(s): 52.40.Nk, 52.50.Jm, 52.65.RrComment: Second Revised Version, 13 pages (REVTeX), 3 figures in ps-format, submitted for publication to Physical Review E, WWW: http://www.physik.tu-darmstadt.de/tqe

The wall shear rate distribution for flow in random sphere packings

The wall shear rate distribution P(gamma) is investigated for pressure-driven Stokes flow through random arrangements of spheres at packing fractions 0.1 <= phi <= 0.64. For dense packings, P(gamma) is monotonic and approximately exponential. As phi --> 0.1, P(gamma) picks up additional structure which corresponds to the flow around isolated spheres, for which an exact result can be obtained. A simple expression for the mean wall shear rate is presented, based on a force-balance argument.Comment: 4 pages, 3 figures, 1 table, RevTeX 4; significantly revised with significantly extended scop

Coherent control using adaptive learning algorithms

We have constructed an automated learning apparatus to control quantum systems. By directing intense shaped ultrafast laser pulses into a variety of samples and using a measurement of the system as a feedback signal, we are able to reshape the laser pulses to direct the system into a desired state. The feedback signal is the input to an adaptive learning algorithm. This algorithm programs a computer-controlled, acousto-optic modulator pulse shaper. The learning algorithm generates new shaped laser pulses based on the success of previous pulses in achieving a predetermined goal.Comment: 19 pages (including 14 figures), REVTeX 3.1, updated conten

New approach to fusion-laser optical pulse generation has proven very reliable

Starting with 6 CW frequency stabilized CO/sub 2/ oscillators, we have been able to reliably generate approx. 1 ns pulses with any combination of six rotational-vibrational lines selected from both the P- and R-branches, and the 9 ..mu..m and 10 ..mu..m bands. Total output power of > 100 KW has been obtained with excellent reproducibility in both the total power as well as the ratios of the powers in the six rotational-vibrational lines. This capability represents a potential starting point for temporal pulse programming of the output of a large CO/sub 2/ amplifier chain

The Effect of Air on Granular Size Separation in a Vibrated Granular Bed

Using high-speed video and magnetic resonance imaging (MRI) we study the motion of a large sphere in a vertically vibrated bed of smaller grains. As previously reported we find a non-monotonic density dependence of the rise and sink time of the large sphere. We find that this density dependence is solely due to air drag. We investigate in detail how the motion of the intruder sphere is influenced by size of the background particles, initial vertical position in the bed, ambient pressure and convection. We explain our results in the framework of a simple model and find quantitative agreement in key aspects with numerical simulations to the model equations.Comment: 14 pages, 16 figures, submitted to PRE, corrected typos, slight change